Novinky

30.06.2020

Jako jedni z prvních v republice máme horkou novinku od Bowers and Wilkins: BW 702 S2 Signature. Povrchová úprava je opravdu špičková – žádný p... číst celé

26.06.2020

Akce Sonus faber: Výměna starých reprosoustav za nové

Nebaví Vás už Vaše staré reprosoustavy? Dáme Vám 100% jejich původní ceny při nákupu nových reprosoustav Sonus faber. Vykoupíme jakékoliv Vaše staré r... číst celé

23.06.2020

Reprosoustavy Bowers & Wilkins znovu v naší nabídce

Po 10 letech produkty legendární značky Bowers and Wilkins znovu v naší nabídce. K poslechu jsou modely: BW 800 D3 BW 805 D3 BW 702 S2 Signature... číst celé

Zobrazit všechny novinky

Kontakty

AVcenter.cz s.r.o.
Vinohradská 1597/174
130 00 Praha 3
Tel: +420 737 123 775

Úvod
Reproduktory
Vestavný subwoofer Tannoy iW60 EFX

Vestavný subwoofer Tannoy iW60 EFX

Doprava ZDARMA

Kompletní specifikace
Komentáře 0
Ke stažení
Související zboží5
Vestavný subwoofer Tannoy iW60 EFX
skladem u dodavatele, expedice do 24 hodin
38 990,00 Kč
32 223,14 Kč bez DPH
ks

Kompletní specifikace

1x 165mm Dual Concentric™, 2x 100mm Dual Concentric™, 74Hz-27kHz/-6dB; doporučený zesilovač 100-200W; 90dB; 8Ω; 590x345x94mm; váha 9,5kg

Features

165mm (6.50”) high sensitivity, point source and constant directivity Dual Concentric™ drive unit
Two 165mm (6.50”) bass drivers
Constant time delay over the frequency spectrum
Exceptional transient performance
90 degree conical dispersion
Superior harmonic alignment
Natural, clean and integrated sound
Enhanced intelligibility, sound staging and dynamics
Recommended amplifier power 100 to 200W @ 8 Ohms
Sensitivity 91dB (1W = 2.83V for 8 Ohms)
Maximum SPL 117dB average
Rugged construction MDFclosed enclosure, internally braced and finished with textured black paint
Isolation mounting system minimises energy transfer to the wall material
Optional pre-installation frame available

Applications

Auditoria / Lecture Theatres
Conference rooms
Corporate AV
Museums & Galleries
Retail Spaces & Malls
Theme Parks

System

Frequency Range 1	74Hz - 27kHz
System Sensitivity (1W @1m) 2	90dB (1W = 2.83V for 8 Ohms)
Nominal Coverage Angles	90 degrees conical in music mode 120 degrees horizontal x 90 degrees in cinema mode
Coverage Angle (1kHz to 6kHz)	120 degrees
Directivity Factor (Q)	3.5 averaged 1kHz to 6kHz
Directivity Index (DI)	5.5 averaged 1kHz to 6kHz
Rated Maximum SPL	Average: 110dB
	Peak: 116dB

Power Handling	Average: 100W
	Programme: 200W
	Peak: 400W

Recommended Amplifier Power	100 - 200W @ 8 Ohms
Crossover	1.6kHz
Nominal Impedance	8 Ohms in music mode 4 Ohms in cinema mode
Distortion	10% Full Power (21.9V) 2nd Harmonic 250Hz: 1.84% 1kHz: 0.34% 8kHz: 0.91% 3rd Harmonic 250Hz: 0.30% 1kHz: 0.61% 8kHz: 0.17% 1% Full Power (6.9V) 2nd Harmonic 250Hz: 0.19% 1kHz: 0.40% 8kHz: 0.46% 3rd Harmonic 250Hz: 0.35% 1kHz: 0.32% 8kHz: 0.89%
Transducers
Music Mode	1 x 165mm (6.50”) constant directivity Dual Concentric™
Cinema Mode	2 x 100mm (4.00”) Dual Concentric™ in dipole configuration
Construction
Enclosure	11.5 litre (net total volume) closed and internally braced MDF enclosure with integral isolation mounting system
Finish	Textured black paint White powder coated perforated steel grille with foam behind
Connectors	Gold plated spring terminals
Controls	Mode selection input (12VDC relay activated via Dinkle connector) Polarity switch
Dimensions (HxWxD)	590 x 345 x 94mm (23.23 x 13.58 x 3.70")
Optional Accessory	Optional pre-installation frame available
Weight	9.50kg (20.94lbs)
rn Notes 1. Average over stated Bandwidth. Measured in an IEC baffle in an Anechoic Chamber 2. Unweighted Pink noise input, measured at 1m on axis 3. Long term power handling capacity as defined in EIA - 426B test 4. Music mode 5. Cinema mode. For music mode refer to iW63 data Tannoy operates a policy of continuous research and development. The introduction of new materials or manufacturing methods will always equal or exceed the published specifications, which Tannoy reserves the right to alter without prior notification