Nevíte si rady? Zavolejte.
По-русски: +420 604 605 355
0 ks
za 0,00 Kč
Nákupní košík je prázdný
Potřebujete poradit? Neváhejte nás kontaktovat.
Nakupte ještě za 2 000,00 Kč a máte dopravu ZDARMA
  1. Úvod
  2. Přepěťové ochrany
  3. Síťový filtr IsoTek EVO3 Super Titan 32

Síťový filtr IsoTek EVO3 Super Titan 32

  • Doprava ZDARMA

EVO3 Super Titan 32verze 32A ultimativní síťový filtr a ochrana, konstruován pro maximální provoz prvotřídních high end zesilovačů, stříbřené 4x 32A N... celý popis
8 a více dní
Barevné provedení 2
349 990,00 Kč
289 247,93 Kč
bez DPH
Číslo produktu:EVO3 Super Titan 32
EAN kód:5060296410391
Hlídat cenu / dostupnost
Kompletní specifikace

EVO3 Super Titan 32
verze 32A

ultimativní síťový filtr a ochrana, konstruován pro maximální provoz prvotřídních high end zesilovačů, stříbřené 4x 32ANeutrik zásuvky + Multi link, včetně síťových kabelů Intense 32A (1x vstupní a 4x výstupní), provedení stříbrné,500x300x500mm, 30kg

Super Titan je nejvyspělejším vysokoproudým přístrojem v technologii síťových fltrací, který zajišťuje extrémně nízký odpor, čisté vysokoproudé napájení pro high end výkonové zesilovače se schopností dodat přechodové špičky až o výkonu 35,500W. Super Titan je celosvětově nejvýkonnější síťový fltr.

  • Odstraňuje obecný šum a šum z diferenčního režimu.
  • Snižuje radiofrekvenční rušení o 85dB.
  • Nezávislé výstupy - žádná zásuvka není propojena s jinou, čímž je zamezeno vzájemné kontaminaci mezi přístroji.
  • Unikátní fltrační síť zahrnuje uskupení čtyřech sedmi stupňových fltrů v paralelním
    zapojení a zajišťuje extrémně nízký odpor a vysoký proud.
  • KERP© s inovativním způsobem zajišťuje rovnocenný odpor a rovnocenné napájení
    napříč všem zásuvkám.
  • Ochrana proti nárazům elektrického proudu o síle až 135,000A spolu s ochranou před
    poruchou uzemnění představují jedinečný sekvenční systém ochrany od IsoTeku.
  • Čtyři výstupy poskytují 7,360W trvalého výkonu s možností přechodové špičky o výkonu až 35,500W.
  • Jedinečný ISIS© izolační sytém - naprosto eliminuje resonance šasi jednotky Super Titan (hliníkové tělo je zabudované do plně kontrolovaného resonančního sytému)  


Designed specifically for high-current applications, IsoTek?s Super Titan is the ultimate power conditioner for high-end audio systems.

Building upon the design of the existing Titan, IsoTek?s new flagship was inspired by the emergence of a new breed of super-powerful high-end amplifiers whose current demands set specific challenges that are not fully met by existing mains conditioning products. In the process, IsoTek has designed a power conditioner that outperforms all others currently available, both on paper and in practice.In the six years since its launch, the multi-award-winning Titan has built a reputation as the finest mains conditioner on the market, described by the critics at What Hi-Fi? Sound and Vision as “a revelation” and by those at Hi-Fi News as “the most impressive mains filter we?ve ever heard”. Its innovative technology, designed specifically for power amplification, forms an epoch-making partnership with the IsoTek Nova, which delivers the same exacting level of quality for source components and preamplifiers.

While the Titan remains a critical component in IsoTek?s product range, the arrival of Super Titan heralds the start of a new high-end range of power optimisation components called Ultra Reference. It takes the Titan blueprint and enhances every element of its design to deliver a new benchmark in the field of mains conditioning for high-performance audio and AV systems.

Unrivalled Current Capability

Like the existing Titan, the Super Titan is designed to meet the specific demands of high-end power amplifiers. However, in terms of its ability to deliver current, it is almost twice as powerful: while the Titan is capable of delivering 4,600W of continuous current, the Super Titan delivers 7,360W. With 35,500W of transient power on tap, Super Titan is quite simply the world?s most powerful audiophile mains conditioner.

Unique Filtering Circuits

The Super Titan?s filtering capability is also double that of the Titan. It uses a group of four seven-stage filters in a series parallel combination. A simple comparison may be drawn to multiple-cylinder engines. The four sections combine to make one ?super? seven-element filter, which is inherently superior to engineering a single large filter.

Eliminating Noise Without Limiting Transient Power

Mains noise can be broken down into two types. The first is differential noise, which is typically caused by switching – everything from a light switch to the switch-mode power supplies used in common domestic appliances. The second is common mode noise, which emanates from a point source, such as a radio transmitter. These noise types are complete opposites, yet they exist side by side and arrive in the home via live and neutral mains cables.The elimination of mains-borne noise is the primary purpose of any specialist power conditioner, but this is difficult to achieve without compromising an amplifier?s transient performance. However, the Super Titan?s filtering circuits remove both differential and common mode noise, improving sonic clarity and definition, without restricting transient ability. The filtering circuits comprise bespoke parts that cover an extremely wide frequency band, aided by specialised choke designs.

Direct Coupled Design©

The Super Titan?s filtering circuits are incorporated into IsoTek?s unique Direct Coupled Design© concept, originally developed for the Titan and further enhanced for Super Titan to ensure optimal high-current filtering. Put simply, if a test meter were connected to the Super Titan, the reading would be akin to a very
2low resistance piece of wire from input to output. Other manufacturers use isolation transformers as part of their mains conditioning solutions, but IsoTek?s Direct Coupled Design© eschews these devices because they break the cardinal rule of maintaining transient power.

IsoTek?s proprietary KERP© technology secures a pure, symmetrical signal path through the unit, while the Polaris-X© network reduces crosstalk and improves component-from-component isolation. In addition, a massive 135,000 Amps of instantaneous and repeatable surge protection safeguards valuable audio equipment against spikes and surges in the mains supply – no other device on the market can match this level of protection.

Integral Isolation Support

Fashioned from aluminium, Super Titan?s rigid outer casing is cradled in a specially developed support structure called ISIS© (Independent System Isolation Support). The main unit is point-clamped between two panels at the top and bottom, each of which is formed of a special resonance-damping material sandwiched between two ultra-dense Corean plates, with the overall structure supported by four substantial aluminium pillars. ISIS© was developed in conjunction with Kurt Olbert, the creator of RDC and an acknowledged expert in developing proprietary materials for audio applications. Its purpose is two-fold. First, it reduces the effect of airborne vibration and microphony, as well as subsonic vibration and resonance in the device itself, which are detrimental to the performance of electronics. Second, its shape, strength and resonance-damping abilities provide a perfect platform on which to place other components, its stackable design saving space when using more than one IsoTek unit.

Purpose-Built Power Cable

In order to deliver up to 32Amps continuously, the Super Titan incorporates silver-plated 32A locking Neutrik input and output sockets. To ensure optimum results, IsoTek has also designed a unique 32A power cable called Intense, developed especially for the Super Titan – no other power conditioner brand can boast such attention to detail.

The Ultimate High-Current Power Conditioner

No matter how powerful the amplifier, however current-hungry it may be, Super Titan delivers a super-clean, ultra-consistent supply of electricity without limitation, ensuring the world?s best amplifiers perform to their full potential every time.

Super Titan ships with IsoTek's top of the range 32A Intense power cable. Either a full loom (ST32A) or input cable (ST20A).

Number of outlets4 + Multi-Link/Auxiliary
Type of outlets (32A)Silver-plated 32Amp Neutrik
Type of outlets (20A)UK, EU, US, CH, AU, ZA
Mains inletSilver-plated 32Amp Neutrik
Mains voltage100-240VAC/50-60Hz
Maximum current32Amp continuous
Total power (nominal 230V)7,360W continuous power
Transient power35,500W
Surge protection135,000Amp instantaneous
Dimensions500x300x500mm (WxHxD)

Key features

  • Ultimate high-current power conditioner
  • Suitable for all audio and AV components including the largest power amplifiers
  • 4 high quality 32Amp silver plated outlets or 4 high quality UK, EU, US, CH, AU, ZA outlets.
  • Improved multi-award winning Direct Coupled Design© circuit
  • Unique ISIS resonance control system
  • High quality 32Amp input & output cable loom included - 32A version
  • High quality 32Amp input cable included - 20A version

Product Awards

Hi-Fi World
Zboží zařazeno v kategoriích

+420 737 123 775 По-русски: +420 604 605 355


Otevírací doba

Po-Čt: 10:00 - 17:30
Pá:        9:00 - 17:00

Kde nás najdete

AVcenter.cz s.r.o. 

Vinohradská 1597/174
130 00 Praha 3

По-русски: +420 604 605 355
Podle zákona o evidenci tržeb je prodávající povinen vystavit kupujícímu účtenku. Zároveň je povinen zaevidovat přijatou tržbu u správce daně online; v případě technického výpadku pak nejpozději do 48 hodin.
Copyright © AVcenter.cz s.r.o. 1997-2021
Zpracování osobních údajů můžete ovlivnit úpravou svých preferencí ochrany soukromí.